Cladding & Panel BIM Services Intelligent 3D Models for Metal Panel, ACM & Skylight Systems
We provide Cladding and Panel BIM services that help architects, facade consultants, contractors, and fabricators deliver complex cladding systems with precision and confidence. Using Autodesk Revit and advanced digital workflows, we develop data-driven models for metal panel systems, aluminium composite material (ACM) cladding, skylights, canopies, and custom facade geometries that integrate seamlessly with architectural, structural, and MEP systems.
Our models are built for coordination, fabrication, and installation. They support design validation, quantity estimation, shop drawing production, and on-site assembly sequencing.
What We Deliver
Cladding and Panel BIM Modeling involves the creation of detailed, parametric 3D models for cladding and panel systems using Autodesk Revit.
We model every critical component of cladding assemblies—metal panels, ACM panels, skylights, canopies, sub-frames, fixing systems, joints, and flashings—within a single, data-rich digital environment.
We deliver:
- ✅ Parametric 3D cladding and panel models in Revit
- ✅ Metal panel and ACM cladding systems
- ✅ Skylight and canopy systems
- ✅ Sub-frame and fixing system modeling
- ✅ Panel layout drawings with numbering and sequencing
- ✅ Shop drawings and fabrication details extracted from the model
- ✅ Clash detection and coordination reports
- ✅ Quantity takeoffs and material schedules (BOQ)
Advanced facade systems demand a level of precision, coordination, and constructability that traditional 2D workflows are no longer equipped to handle. Complex geometries, tight tolerances, interface conditions, and performance requirements lead to coordination gaps, fabrication discrepancies, and installation delays when not addressed early in the design process. Our BIM approach overcomes these challenges by delivering intelligent, data-rich 3D models that enable accurate design validation, seamless coordination, and reliable construction outcomes.
Why Cladding & Panel BIM Matters
Solve layout discrepancies, automate panel scheduling, and avoid site rework before fabrication.
Complex Geometries Demand Precision
Metal cladding and ACM panel systems often involve complex geometries, curved surfaces, and custom fabrication requirements. Without accurate 3D coordination, misalignments between cladding panels, sub-frames, and structural framing lead to costly delays and rework. BIM provides early warning of constructability challenges before they impact site timelines.
Fabrication-Ready Outputs
Our models support the extraction of detailed shop drawings and fabrication details directly from coordinated BIM models: cladding elevations and panel layout drawings, sub-frame and fixing system details, skylight and canopy installation guides, panel schedules with numbering, and quantity take-offs for panels, fasteners, and sealants. Fabrication teams get the information they need and installation teams get clear, coordinated instructions.
Seamless Integration with Building Systems
Cladding and panel systems must interface with structural framing, MEP systems, interior finishes, and building services. Our models integrate seamlessly with other building systems, ensuring that clashes are identified and resolved before fabrication begins. We use tools like Navisworks and BIM 360 to coordinate facade models with structural and MEP elements.
Cladding Levels of Development (LOD)
We deliver cladding and panel models aligned to international LOD standards:
| LOD Stage | Title | Modeling Component Scope | Tolerance | Key Deliverables |
|---|---|---|---|---|
| LOD 200 | Conceptual Massing | Cladding panels modeled as approximate boundary layers and envelope bounds with grid layout lines. | +/- 50 mm | Zoning drafts & concept panel layouts |
| LOD 300 | Detailed Design Models | ACM and metal cladding panels modeled with exact dimensions, joints, reveals, and skylight openings. | +/- 10 mm | Architectural coordination packs |
| LOD 350 | Coordinated Assemblies | Modeling of subframes (T-profiles), fixing clips, anchor brackets, flashings, thermal insulation, and fire barriers. | +/- 3 mm | Navisworks clash checks & coordinated subframes |
| LOD 400 | Fabrication Detailing | CNC-ready cladding panels, rivets, cassette hook details, gaskets, sealant layers, and fastener specifications. | +/- 0.5 mm | Shop drawings, panel schedules & CNC data |
Our Cladding & Panel BIM Services
We provide comprehensive 3D modeling, coordination, and detailing services for advanced cladding assemblies:
Metal Panel & ACM Cladding BIM Modeling
We create intelligent 3D models for metal panel and ACM cladding systems, capturing alignments, fixings, and geometries.
- Aluminium composite material (ACM) panels
- Metal composite material wall panels
- Panel layout and sub-frame systems
- Concealed and visible fixing details (such as Buildbond BB-T-REM & BB-T-SZ systems)
- Joint and flashing details
Skylight & Canopy BIM Modeling
We develop precise models for skylight and canopy systems to coordinate glazing framing and support connections.
- Dome skylights (curb and deck mounted)
- Pyramid, barrel vault and segmented arch skylights
- Canopy systems and roof structures
- Glazed roof framing systems
- Polycarbonate sheet modeling (including VELUX & LuxGuard systems with UV protection)
Shop Drawing Production
We extract detailed 2D shop drawings and fabrication details directly from the coordinated BIM model.
- Cladding elevations and panel layout drawings
- Sub-frame and fixing system details
- Skylight and canopy installation guides
- Panel schedules with numbering and sequencing
- Material take-offs and BOQs
Clash Detection & Coordination
We run clash detection between cladding and panel models and structural framing, MEP systems, and interior finishes.
- Navisworks and BIM 360 coordination
- Clash detection reports
- Embed and anchor clearance checks
- MEP penetration layout resolution
BOQ & Material Takeoff
We generate accurate quantity takeoffs and material schedules directly from the model to support procurement.
- Panel quantities and dimensions
- Fastener and sealant schedules
- Material specifications
- BOQ for procurement planning
Our Cladding & Panel BIM Workflow
We systematically integrate design inputs, coordinate trades, and generate shop details:
Setup & Integration
We import architectural drawings, structural models, and cladding sketches into Revit, setting shared coordinates, levels, and grids.
Parametric Modeling
We create cladding and panel elements using custom parametric families, modeling subframes, joints, and flashings.
Coordination & Clash Detection
We ensure proper integration between cladding elements and structural framing, MEP penetrations, and finishes, checking clashes.
Shop Drawing Production
We extract detailed 2D shop drawings from the model, including cladding elevations, panel layouts, subframe details, and installation guides.
Quality Assurance & Control
Each stage of delivery is reviewed by our team to ensure compliance with design, performance, and international BIM standards.
Compatible Output Formats
Every envelope model and detail sheet is exported in industry-standard AEC formats:
Quality & Standards
Click checkboxes to verify compliance standards and sign off the quality checklist:
QUALITY VERIFICATION REPORT: CLADDING & PANEL MODELING
STATUS: ISO 9001 & UK BIM LEVEL 2 COMPLIANTACM Cassette Joint Tolerance
Verify cladding panel sizes, joints, reveals, and cassette hook details comply with thermal expansion constraints.
Subframe & Bracket Coordination
Validate that T-profile subframes, bracket spacings, and structural anchors align with structural steel and slab edges.
Skylight Water-tightness
Ensure flashings, curbs, drainage slopes, and polycarbonate sheets align with building envelope waterproofing lines.
UK Level 2 & ISO 19650 BIM Standards
Audit model file naming conventions, parameters, shared coordinates, and project folder schemas.
Material Specs & Fire Ratings
Check that parametric cladding panels have correct density, thermal conductivity, fire ratings, and manufacturer codes.
Why Choose Our Cladding & Panel BIM Services?
We provide deep technical envelope knowledge, constructability verification, and compliant BIM processes.
Specialized Expertise
Cladding and panel design requires a distinctive appearance, technical functionality, and significant investment in installation planning. Our team has deep technical expertise in delivering cladding and panel BIM across the full project lifecycle.
End-to-End Capability
We offer comprehensive support from early design development through to fabrication and installation. We work alongside architects, facade designers, and contractors to verify design and enhance constructability.
Parametric & Complex Geometry Expertise
Our team is experienced with parametric facades, double-curved surfaces, sloped glazing, custom extrusions, and advanced geometries. We create detailed models that capture geometry, alignment, tolerances, and connection logic precisely.
Quality & Standards
All our work complies with international BIM standards and applicable local building codes. Each stage is verified to ensure compliance with design, performance, and regulatory requirements.
Industries We Serve
Our cladding modelers and detailers support diverse envelope projects across sectors:
High-Rise Office Towers
Sleek ACM cassettes and aluminum panels with ventilated subframes
Shopping Malls & Retail Centers
High-finish ACM cladding, canopies, and polycarbonate skylight systems
Airport Terminals
Expansive metal panel envelopes, canopy roof structures, and glazed skylights
Cultural Buildings & Museums
Architectural custom-profile sheets and parametric double-curved facades
Hotels & Hospitality
Sleek entrances, decorative metal screens, and overhead skylight geometries
Healthcare Facilities
Insulated metal panel envelopes and natural daylighting canopy layouts
Mixed-Use Developments
Coordinated metal and composite panel assemblies with structural systems
Residential Complexes
Durable cladding panels, aluminum balcony detailing, and lobby canopies
Data Centers
High-security industrial panels, louvers, and performance envelope interfaces
Frequently Asked Questions
Find answers to common questions about our cladding and panel BIM modeling services below.
Cladding and Panel BIM Modeling involves the creation of detailed, parametric 3D models for metal panel, ACM cladding, skylight, and canopy systems using Autodesk Revit.
We model metal panel and ACM cladding systems, aluminium composite material (ACM) panels, sub-frame and fixing systems, skylights and canopies, and custom facade geometries.
We use Autodesk Revit as our primary modeling platform, with Navisworks and BIM 360 for clash detection and coordination. We deliver in DWG, IFC, NWC, and PDF formats.
Yes. We extract detailed shop drawings and fabrication details directly from the BIM model.
Yes. Our team is experienced with parametric facades, double-curved surfaces, sloped glazing, custom extrusions, and advanced geometries.
We ensure proper integration between cladding and panel elements and structural framing, MEP systems, and interior finishes. We run clash detection using Navisworks and resolve conflicts before fabrication.
We deliver Cladding and Panel BIM models at LOD 200-400 depending on project requirements, from schematic design to fabrication-level detailing.
Yes. We generate detailed panel schedules, metal take-offs, hardware quantities, and BOQs directly from the BIM model to support procurement and production planning.
Explore Complementary Services
Coordinate your broader structural and architectural representations with our services: